[ Fleet Telematics ]
Fleet Telematics for Saudi Operations
Monitor vehicle health, fuel, utilisation and connected vehicle data across your fleet. Spot issues earlier, understand performance and turn telematics signals into action.
Fleet Telematics At a Glance
Vehicle health & diagnostics
See fault codes, battery status, engine status and available diagnostic data in one place.
Fuel & idling
Understand fuel consumption, idle time and the operating patterns behind them.
Odometer & engine hours
Keep mileage and engine hour data together for maintenance and utilisation decisions.
Fault & vehicle alerts
Surface connected vehicle signals that need attention before they become bigger issues.
Vehicle utilisation
See which vehicles are active, idle or underused.
CAN & connected data
Bring supported CAN and FMS telematics data into Vision360 for a broader view of vehicle performance.
SIGNALS INTO ACTION
What the Data is Actually Telling You
Driver behaviour insights
See patterns across harsh braking, acceleration, idling, speeding, high RPM and seatbelt use, with severity and trends to help focus driver coaching through Drive360.
Vehicle maintenance
Turn engine faults, battery issues and service intervals into maintenance actions through Drive360, from identifying the issue and updating vehicle availability to tracking the repair and returning the vehicle to service.
Measure Utilisation. Make Better Fleet Decisions.
Active, idle and offline
See how fleet time is split between active, idle and offline, helping you understand how much of your fleet is actually being used.
See the Week, Day by Day
Compare moving time, idle time and total activity across the week to uncover patterns that a single day might miss.
Full utilisation report
Drill into utilisation by vehicle and depot to understand what sits behind the headline numbers and where capacity may be underused.
BUILT FOR SAUDI FLEET OPERATIONS
Understand What Your Vehicles Are Telling You
From city fleets and intercity freight to construction, industrial and project operations, bring vehicle health, utilisation and connected telematics data together across your Saudi operation.
Heavy & Commercial Vehicles
Keep engine hours, mileage, faults, idling and available vehicle data visible across heavy and commercial fleet operations.
Intercity & Long Distance Operations
Understand vehicle activity across longer journeys, with distance, engine hours, idling and utilisation connected to each vehicle.
Construction & Project Fleets
Monitor available vehicle and equipment data across project locations, helping teams understand utilisation and identify vehicles that may need attention.
Multi Depot Operations
Compare vehicle health, activity and utilisation across depots and operating locations from one connected view.
Additional features
Vehicles online
See the live online count and compare it with yesterday.
Active faults
Surface connected fault codes that need attention.
Maintenance due
See vehicles with maintenance due within the configured window.
High fuel usage
Identify vehicles consuming more fuel than their usual pattern.
Vehicles requiring review
Flag vehicles that need someone to investigate.
Battery and engine status
View available battery and engine diagnostics.
Idle time
Measure actual idle time rather than estimating from the roster.
Odometer and engine hours
Keep mileage and operating hours together for each vehicle.
CAN and FMS data
Bring supported connected vehicle signals into the platform.
Live map and traffic
See every connected vehicle and current traffic conditions in one view, with GPS fleet tracking.
Mobile vehicle card
Access vehicle health, alerts, next service and fuel information on the go.
Drive360 handover
Turn relevant vehicle alerts into maintenance or coaching actions in Drive360.
Connectivity
IoT and M2M Connectivity: How Vehicle Data Reaches You
Fleet telematics uses IoT and M2M (machine-to-machine) connectivity to transmit vehicle data over cellular networks, giving operators visibility into vehicle activity, performance and condition.
Cellular M2M connectivity
Each vehicle reports over cellular networks, so activity, performance and condition reach the platform without anyone sending it in.
Built for patchy coverage
When network coverage drops on intercity or remote routes, supported devices store data and transmit it once connectivity is restored.
IoT sensors beyond the vehicle
Connected IoT sensors provide additional insights into equipment, temperature and other operating conditions, bringing more information into one connected platform.
The Data that Drives the Next Decision
The signal
A fault code that needs attention
The decision
Investigate the issue and plan the next action
The outcome
Fleet decisions based on what the vehicles are actually telling you
What telematics data is available?
Vehicle health and diagnostics, including fault codes, battery and engine status, fuel and idling, odometer and engine hours, vehicle alerts, utilisation, and supported CAN and FMS data.
Does this depend on the vehicle?
Yes. Available data depends on the connected hardware and the vehicle's own data bus, so diagnostic depth varies by make, model and equipment fitted. Trailers, plant and equipment without their own data bus are covered by GPS asset tracking.
What happens to an alert once it is raised?
Relevant alerts can be carried into Drive360 for further action, allowing teams to create maintenance work, manage vehicle availability and track the issue through to return to service.
How is utilisation calculated?
From active, idle and offline time across the working day. The split is shown over the week, with per vehicle detail available in the full report.
Can driver behaviour be coached from here?
Yes. Harsh braking, rapid acceleration, excessive idling, speeding, high RPM and seatbelt off can be measured by severity and turned into coaching through Drive360.
Is any of this visible on mobile?
Yes. The vehicle card shows health, active alerts, next service and fuel level, giving teams quick access to available vehicle health, alerts, service and fuel information without opening the full console.
Can Vision360 help with vehicle readiness?
Yes. Connected vehicle data can be viewed alongside maintenance and inspection information, helping teams identify vehicles that require attention before they are put into operation.
See More Than the Vehicle. Understand Its Performance.
Understand the health, efficiency and utilisation of every vehicle, with the insight to make better fleet decisions.